This article analyzes the existing innovative medical centers abroad and in Russia. On the basis of the brightest and most modern healthcare facilities, 35 healthcare facilities have been studied for architectural planning and spatial-volumetric aspects, and characteristic features in the architecture of buildings of this type have been identified. A graphoanalytical comparative analysis of architectural-stylistic and architectural-planning solutions, high-tech medical centers, starting with specialized centers and ending with multidisciplinary “mega hospitals”, taking into account their urban planning location, was carried out. Factors and patterns in architectural solutions that can be applied in the development of future healthcare facilities in Russia have been identified. In the process of research and comparison of six high-tech hospitals in Russia and the USA, the main architectural, planning and urban planning principles and factors of the formation of healthcare facilities were identified, development trends in the design of modern medical centers in Russia requiring new planning and design solutions were identified.
More recently, concrete did not attract attention because of its “dullness”. Today, it has changed its appearance so much that sometimes it is very difficult to distinguish it from natural stone. Modern concrete is able to convey almost any of the thinnest lines, reproduce a variety of textures, and be painted in a variety of colors. It is able to imitate boulders, porous ancient oriental limestones, yellow-gray sands, smooth cobblestones, monolithic rock with cracks and potholes, reef fragments and much more. Concrete products can be wonderful to decorate the facade of a building or house: it is quite decorative, relatively light, convenient and easy to install and does not have a radioactive background. Among other things, it has high frost resistance.
In this article, on the basis of state programs and resolutions of the Russian Federation Government, a number of problems consided, that have developed in the field of architectural construction of cultural and creative objects, and an analysis measures of state policy is carried out, the purpose of which is to solve the identified problems.
One of the large-scale projects of the implementation of the state socio-cultural policy in the Russian Federation is the creation of multifunctional cultural centers (MFCC) in small towns of Russia. In particular, in the Altai Republic, among the strategic priorities in the field of culture, the development of various forms of cultural activities and the implementation of promising creative projects are highlighted, including the creation of a modern cultural and entertainment center in the capital of the Republic – Gorno-Altaysk.
Thus, the article substantiates the relevance of placing a multifunctional cultural center in the city of Gorno-Altaysk, provides arguments for the choice of territory, considers the urban development situation of the city as a whole and the selected sites in particular. The surrounding development is assessed and problem areas are identified.
The article discusses a new form of creating public spaces for the whole family - playhub. This is a rethinking of the conception of a "standardized set" of sites. The features that distinguish them from playgrounds are revealed, such as: the use of the landscape, the allseason use, the transparency of the territory and the involvement of people of all ages. Analyzed examples of playhubs in public spaces and in the territories of residential complexes in the Russian Federation. Their distribution is the result of the interest of both residents and developers. This circumstance makes it possible to reasonably predict the development and distribution of playhubs in the near future. The article forms the basis for creating a typology of playhubs in future research.
This paper considers the possibility of improving the public and pedestrian space, taking into account modern trends in urban design, as well as the natural-climatic and socio-cultural features of Akademgorodok 2.0.
The main goal is to create a unique, comfortable and safe environment, reviving the individuality and uniqueness of Akademgorodok, through a functionally convenient, environmentally friendly and socio-culturally developed space through research, analysis of conflict situations, analogues, and the development of a single design code.
The environmental approach, as a research method in design, is to achieve a functionalfigurative unity of design objects with the natural environment and the artificial environment. Taking into account the historical and cultural potential of the architectural environment, architectural monuments, historical buildings.
Theatrical costume is an important component of theatrical action, which embodies the expressive and emotional components of the entire figurative drawing of the performance. The birth of a costume is not only a creative process, but also carries a full-fledged project activity, which includes the stages of preparation, materialization and presentation on stage. In the modern theater, when the production of a new play is considered as a production project, special attention is paid to the organization of project work. A clear interaction of the costume designer with the structural divisions of the theater ensures not only the success of creating a stage image, but also the entire technological production of the performance.
The article examines the history and development of Tomsk wooden architecture in the modern and its possible influence on modern costume design. Wood carving has a long and rich history in the city of Tomsk, located in the very center of Siberia. Thanks to its unique style and traditional techniques, Tomsk wood carving can be an important source of inspiration for modern costume designers.
The purpose of writing this article is to demonstrate the features of making a basrelief from gypsum plaster. The article examines the types of modern materials used in the interior, considers the types of decorative plasters, the relevance of their application. The technology of self-execution of a decorative relief panel made of gypsum plaster is also described by the example of the work of students of the department of MDI NGUADI. The article will be interesting not only for students and teachers, but also for all creative people who want to make their interior interesting and unique with their own hands.
The article describes the process of realization of a work of art in real time and interaction with all involved persons. An example of the development of events when performing the task of solving the interior of a country private house is given. Recommendations are given in the sequence of stages of conducting the process of performing an art project. As well as a description of the work on the artwork in direct contact between the artist and the customer. Possible nuances arising during the realization of artistic works are described. Examples are given using photographs with a clear chronological sequence. This article can serve as an example and give a complete picture of the conduct of artistic works on the object and will be used as an instruction.
This topic is especially relevant in matters of modern higher education due to the versatility of educational programs and the interests of students, but, despite the differences within the same social group, there are a number of psychological characteristics that unite each student, thanks to the clarification of which it is possible to identify the main problems, as well as determine ways to solve them for a wide range of people. As a control group, students aged 18–25 were taken, who are the main share of students in universities. In the course of the study, a survey was conducted, on the basis of which it was possible to identify the main similarities and differences between students of 1–4 courses, and it was also possible to trace certain kinds of changes and patterns, depending on the stage of education of the respondents.
The article makes an attempt to define the notion of thinking in BIM categories in order to find key points in the architecture student’s learning process to which the strategy of mastering ArchiCAD not only as a graphic editor, but also as a complex system parameterised environment for creating digital models can be tied. It is shown that this should be done reasonably and incrementally, taking into account the student’s general development in the architectural profession without detracting from the artistic, creative and aesthetic component in the general structure of education, but rather supplementing it with powerful specific possibilities of using digital technologies, in particular the Param-O tool (visual programming module). Some options for the organization of learning tasks, problem situations, creative techniques capable of shaping students’ ability to think in BIM categories are considered.
When studying the effectiveness of vibration-insulating supports of a new type with accepted parameter values and when designing new, improved technical and economic parameters, it is important to assess the impact of changes in various parameters on the quality of vibration protection. The article sets and solves the problem of choosing the parameters of vibration-insulating supports for qualitative parametric optimization.
